Limewash Stucco and Concrete in Federal Way

Typical cost in Federal Way

  • One wall or garden wall, about 300 sq ft$1,000 – $2,400+
  • One-story stucco house, about 1,500 sq ft$5,500 – $12,000+
  • Two-story stucco house, 2,000–2,500 sq ft$7,000 – $18,000+

A clean, sound stucco or concrete wall can take limewash, and the flat painted look gives way to a soft, cloudy, plaster-like one. Around Federal Way, we work on cement stucco, block and poured walls: house walls, garden structures and basements.

Stucco and concrete are alkaline, and texture and absorption vary a lot, so we check readiness and test a sample on your actual wall first. We cover Milton, Algona, Pacific, Des Moines, Fife, Auburn and Edgewood as well.

Request a free quote

Stucco cottage finished in warm sand-colored limewash

Stucco and concrete limewash options

Cement stucco exteriors

Bare stucco, or stucco that was limewashed before, is a great fit, and smooth and sand finishes pick up gentle variation. Stucco painted with sound acrylic needs a bonding primer the limewash maker approves. An elastomeric coating usually has to come off. To keep water from getting behind, we patch hairline cracks.

New stucco

New stucco needs to cure first. One maker, for example, asks for about 21 to 28 days on new Portland cement stucco before its limewash goes on. Different systems have different waits, and the product and the condition of the stucco decide. Going too early can leave blotchy color.

Concrete block and cinder block

A block garage or garden wall loses its bare-utility look under limewash. The joints and the faces soak it up differently. We work a first coat into the texture and then add a finish coat, which comes out more even.

Poured concrete walls

Poured or board-formed concrete, inside or out, can go a softer, stone-like color. Form oil, curing compound and sealer all block absorption, so we look for them, clean first, test absorption, then sample.

Basement and garage walls

Limewash is a long-used breathable finish for masonry walls, and it can brighten a basement. It will not stop a leak or hold back water pressure. Fix the water first, then finish.

Close view of soft clouded limewash texture in raking light

Is your stucco or concrete ready?

Before anything else, we walk the wall, tapping for hollow spots and looking for cracks, white salt bloom, and any sealer or old coating. Two old coatings matter most: acrylic paint and elastomeric. Both stop limewash from soaking in. Sound acrylic can be primed over if your limewash maker sells a bonding primer for that system. Elastomeric usually has to be stripped, and a major maker rules it out.

Weather works the same as for brick. Wait for a mild, dry stretch, and keep showers and strong afternoon sun off the fresh coat until it has cured.

Looks that suit stucco

Sand, chalk and pale clay bring out the texture of stucco, and darker earth colors look right on garden walls and sheds. A sample board brushed onto your stucco’s own texture shows how much movement to expect.

Request a free limewash quote

Mention whether the wall is stucco, block or poured concrete, any paint or sealer you know of, and the property address. For a basement, add whether it ever feels damp. We'll get back to you soon with an estimate or any questions we have. Estimates are free and there's no obligation.

Call (253) 785-4892

Call (253) 785-4892